The Sensor Kit for the Magician Lite can be programmed using Python and graphic programming. It is easy to get started with and is suitable for beginners. The kit includes the Magic Box and the AI Camera Kit to enable more automation scenarios.
| Module Overview – Light Sensor, Knob Potentiometer, Sound Sensor | ADC, Port3/Port4, Analog input | |
| Module Overview – Joystick, Humiture Sensor, Gesture Sensor, Color Sensor | I2C, Port1~Port6, Digital input | |
| Module Overview – Micro Servo | PWM, Port3~Port6, PWM input | |
| Module Overview – LED Module | Single-bus, Port1~Port6 | |
| Module Overview – PIR Sensor, Dual Button, Photoelectric Switch | IO, Port1~Port6, General IO | |
| Joystick – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Joystick – Communication Mode | I2C | |
| Joystick – Wiring Cable | Universal Sensor Cable | |
| Joystick – X/Y Output Value | 10 ~ 250 | |
| Joystick – Z Output Value | 0: release; 1: press | |
| Joystick – Voltage | 5V | |
| Joystick – Current | 50mA | |
| PIR Sensor – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| PIR Sensor – Communication Mode | IO | |
| PIR Sensor – Wiring Cable | Universal Sensor Cable | |
| PIR Sensor – Detection Distance | 150cm | |
| PIR Sensor – Delay Period | 2s | |
| PIR Sensor – Induction Range | < 100° | |
| PIR Sensor – Static Current | < 60uA | |
| PIR Sensor – Operating Temperature | -20 ~ 80°C | |
| PIR Sensor – Voltage | 5V | |
| PIR Sensor – Current | 50mA | |
| Gesture Sensor – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Gesture Sensor – Communication Mode | I2C | |
| Gesture Sensor – Support Gestures | Up, down, left, right, forward, backward, clockwise, counterclockwise | |
| Gesture Sensor – Effective Recognition Distance | 5cm - 15cm | |
| Gesture Sensor – Voltage | 5V | |
| Gesture Sensor – Current | 50mA | |
| Photoelectric Sensor – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Photoelectric Sensor – Communication Mode | IO | |
| Photoelectric Sensor – Wiring Cable | Already attached | |
| Photoelectric Sensor – Value Range | 0 (no shield), 1 (with shield) | |
| Photoelectric Sensor – Standard Detection Environment | Sunlight less than 10000LX, incandescent lamp less than 3000LX | |
| Photoelectric Sensor – Object to be Detected | Transparent or opaque object | |
| Photoelectric Sensor – Operating Temperature | -25°C ~ 55°C | |
| Photoelectric Sensor – Response Time | <2ms | |
| Sound Sensor – Connection Mode | Connect to any green port of Magic Box (Port3~Port4) | |
| Sound Sensor – Communication Mode | ADC | |
| Sound Sensor – Wiring Cable | Universal Sensor Cable | |
| Sound Sensor – Value Range | 0-1023 | |
| Sound Sensor – Sensitivity | (48dB to 52dB)@1kHz | |
| Sound Sensor – Microphone Impedance | 2.2k ohms | |
| Sound Sensor – Microphone Frequency | 16-20 kHz | |
| Sound Sensor – SNR S/N | 54dB | |
| Humiture Sensor – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Humiture Sensor – Communication Mode | I2C | |
| Humiture Sensor – Wiring Cable | Universal Sensor Cable | |
| Humiture Sensor – Temperature Range | 0~60 °C/±1°C | |
| Humiture Sensor – Humidity Range | 10-90% RH ±5% RH | |
| Humiture Sensor – Voltage | 5V | |
| Humiture Sensor – Current | 50mA | |
| Color Sensor – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Color Sensor – Communication Mode | I2C | |
| Color Sensor – Wiring Cable | Universal Sensor Cable | |
| Color Sensor – Color Detection Result | 0: no color; 1: red; 2: green; 3: blue; 4: yellow; 5: black; 6: white | |
| Color Sensor – Color Value RGB | 0~200 (a larger value indicates a darker color) | |
| Color Sensor – Voltage | 5V | |
| Color Sensor – Current | 50mA | |
| LED Module – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| LED Module – Communication Mode | Monobus | |
| LED Module – Wiring Cable | Universal Sensor Cable | |
| LED Module – RGB Range | 0~255 | |
| LED Module – Brightness Range | 0~100% | |
| LED Module – Voltage | 5V | |
| LED Module – Current | 50mA | |
| Light Sensor – Connection Mode | Connect to any green port of Magic Box (Port3~Port4) | |
| Light Sensor – Communication Mode | ADC | |
| Light Sensor – Wiring Cable | Universal Sensor Cable | |
| Light Sensor – Color Detection Result | 0: no color; 1: red; 2: green; 3: blue; 4: yellow; 5: black; 6: white | |
| Light Sensor – Color Value RGB | 0~200 (a larger value indicates a darker color) | |
| Light Sensor – Voltage | 5V | |
| Light Sensor – Current | 50mA | |
| Knob Potentiometer – Output Voltage | 0~2500mV | |
| Knob Potentiometer – Connection Mode | Connect to any green port of Magic Box (Port3~Port4) | |
| Knob Potentiometer – Communication Mode | ADC | |
| Knob Potentiometer – Wiring Cable | Universal Sensor Cable | |
| Knob Potentiometer – Brightness Return Value | 0-407 (extreme fluctuation is normal) | |
| Knob Potentiometer – Voltage | 5V | |
| Knob Potentiometer – Current | 50mA | |
| Micro Servo – Connection Mode | Connect to any green port of Magic Box (Port1~Port6) | |
| Micro Servo – Communication Mode | PWM | |
| Micro Servo – Wiring Cable | Universal Sensor Cable | |
| Micro Servo – Servo Speed | 0.1sec/60°/4.8V; 0.09sec/60°/6.0V | |
| Micro Servo – Torque | 1.6kg.cm/4.8V; 1.8kg.cm/6.0V | |
| Micro Servo – PWM Frequency | 50Hz/0.5~2.5MS | |
| Micro Servo – Voltage | 4.8-6.0V | |
| Micro Servo – Current | 60mA | |